manualshive.com logo in svg

IEI Technology ECK-3699GH, Руководство пользователя, Страница: 109 / 181

Поделиться
Скачать
IEI Technology ECK-3699GH Скачать руководство пользователя страница 109

 

ECK-3699GH Embedded System

The boot sequence from the available devices is selected. If the “

1st Drive

” option is 

selected a list of available CD/DVD drives is shown. Select the first CD/DVD drive the 

system boots from. If the “

1st Drive

” is not used for booting this option may be disabled. 

5.6 Security 

Use the 

Security 

menu (

BIOS Menu 19

) to set system and user passwords.

 

BIOS Menu 19: Security 

 

Change Supervisor Password 

Use the 

Change Supervisor Password

 to set or change a supervisor password. The 

default for this option is 

Not Installed

. If a supervisor password must be installed, select 

this field and enter the password. After the password has been added, 

Install

 appears 

next to 

Change Supervisor Password

. 

 

 

Page 109

 

Содержание ECK-3699GH






















































































































































































Отзывы:

Нет отзывов