IEI Technology ECK-3692, Руководство пользователя

Страница: 54 / 170

ECK-3692G Embedded System
Page 38
4.2.3 Top Cover Removal
Before the jumper settings can be configured, the top cover must be removed. To remove
the top cover, please follow the steps below:
Step 1:
Locate the top cover retention screws of the rear panel of the ECK-3692G.
Step 2:
Remove the two top cover retention screws (
Figure 4-1
).
Figure 4-1: Top Cover Retention Screws
Step 3:
Slide the top cover and gently remove the top cover from the ECK-3692G.
(
Figure 4-2
).
Step 0:
Figure 4-2: Top Cover Removal