IEI Technology ECK-161B, Руководство пользователя

Страница: 38 / 135

ECK-161B Embedded System
Page 24
Figure 4-6: HDD Bracket Retention Screws
Step 4: Install the metal plate for securing SATA cable
. Align the retention screw
holes on the metal plate with the two retention screw holes near the connector
side on the bottom of the HDD. Insert two retention screws to secure the metal
plate with the HDD (Figure 4-7).
Figure 4-7: SATA Cable Metal Plate Installation
Step 5: Secure the HDD with the HDD bracket
. Align the retention screw holes on the
sides of the HDD with the retention screw holes on the bracket. Insert four
retention screws from the sides of the bracket to secure the HDD with the
bracket (
Figure 4-8
).