IEI Technology ECK-1000 Series, Руководство пользователя

Страница: 46 / 102

ECK-1000 Embedded System
Page 34
4.2.7.2 SO-DIMM Installation (ECK-1000-690S1)
WARNING:
Using incorrectly specified SO-DIMMs may permanently damage the
KINO-690S1. Please make sure the purchased SO-DIMM complies
with the memory specifications of the KINO-690S1. SO-DIMM
specifications compliant with the KINO-690S1 are listed in Chapter 2 .
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer to
Figure 4-10 .
Figure 4-10: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket . Place the KINO-690S1 on an anti-static pad with
the solder side facing down.
Step 2: Align the SO-DIMM with the socket . The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket.
Step 3: Insert the SO-DIMM . Push the SO-DIMM chip into the socket at an angle. (See
Figure 4-10 )