IEI Technology DRPC-W-TGL Series, Руководство пользователя

Страница: 57 / 155

DRPC-W-TGL
Page 42
Step 3:
Remove the metal clip on the Flash Descriptor Security Override jumper to its
default setting
Step 4:
Restart the system. The system will reboot 2 ~ 3 times to complete the ME
firmware update
3.14.2 Clear CMOS Button
CN Label:
J_CMOS1
CN Type:
Button
CN Location:
See Figure 3-38
CN Pinouts:
See Table 3-10
To clear the CMOS Setup (for example if you have forgotten the password, you should
clear the CMOS and then reset the password), you should
disconnect the RTC battery
and
press the button for about 3 seconds. This will set back to normal operation mode.
Figure 3-38: Clear CMOS Location
Table 3-10: Clear CMOS Pinouts
PIN NO. DESCRIPTION
NC (default)
Keep CMOS Setup
(Normal Operation)
Press button Clear CMOS Setup