IEI Technology DRPC-330-A7K Series Скачать руководство пользователя страница 44

Страница: 44 / 74

DRPC-330-A7K Embedded System

Page 34

Step 3:

Make sure the power button is turned on.

Step 4:

Plug the system into a monitor and check to see if anything appears on the

screen. If the boot-up screen appears it means the power LED has failed. To fix

this problem, contact an IEI sales representative directly.

Step 0:

4.2.2 The System Doesn’t Boot Up

If the system doesn’t boot up please do the following:

Step 1:

Check the power is turned on. See

Section 4.2.1

above.

Step 2:

Make sure the SO-DIMM modules are properly installed.

Step 0:

4.2.3 More Troubleshooting

Nothing appears on the monitor after booting up the system

: Make sure the monitor

is properly connected to the system and the monitor is connected to a power supply and

turned on.

WARNING:

If all troubleshooting measures have been taken and the system still

fails to start, contact the IEI reseller or vendor you purchased the

DRPC-330-A7K from or contact an IEI sales representative directly. To

contact an IEI sales representative, please send an email

[email protected]

Содержание DRPC-330-A7K Series











































































Результаты поиска

Содержание DRPC-330-A7K Series

Отзывы:

Похожие инструкции для DRPC-330-A7K Series

Бренды по названию

Популярные бренды

IEI Technology DRPC-330-A7K Series, Руководство пользователя

Результаты поиска

Содержание DRPC-330-A7K Series

Отзывы:

Похожие инструкции для DRPC-330-A7K Series

Бренды по названию

Популярные бренды