IEI Technology DM-F SERIES Скачать руководство пользователя страница 103

Страница: 103 / 130

DM-F Series Monitor

Page 87

DECLARATION OF CONFORMITY

This equipment

has been tested and found to comply with specifications for CE marking.

If the user modifies and/or installs other devices in the equipment, the CE conformity

declaration may no longer apply.

FCC WARNING

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:



This device may not cause harmful interference, and



This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Содержание DM-F SERIES



































































































































Результаты поиска

Содержание DM-F SERIES

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology DM-F SERIES, Руководство пользователя

Результаты поиска

Содержание DM-F SERIES

Отзывы:

Бренды по названию

Популярные бренды