IEI Technology Afolux AFL-15B-AM2, Руководство пользователя

Страница: 45 / 176

AFL-AM2 Panel PC
Page 29
3.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1:
Unpack the flat panel PC
Step 2:
Install the CompactFlash® card (optional)
Step 3:
Install the HSDPA module (optional)
Step 4:
Install the hard drive (optional)
Step 5:
Mount the flat panel PC
Step 6:
Connect peripheral devices
Step 7:
Configure the system
Step 0:
3.4 Unpacking
To unpack the flat panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the flat panel PC has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1:
Use box cutters, a knife or a sharp pair of scissors to cut the tape that seals the
top side of the external (second) box.
Step 2:
Open the external (second) box.
Step 3:
Use box cutters, a knife or a sharp pair of scissors to cut the tape that seals the
top side of the internal (first) box.
Step 4:
Lift the monitor out of the boxes.