IEI Technology AFL4-W10-EHL, Руководство пользователя

Страница: 35 / 135

AFL4-W10/W12/12/W13-EHL Panel PC
Page 34
Figure 3-3: M.2 Module Slot Location
Step 3: Line up the notch on the M.2 module with the notch on the connector. Slide the
M.2 module into the socket at an angle of about 20º.
Step 4: Secure the M.2 module with the retention screw. Push the other end of the M.2
module down and secure the module with the previously removed retention
screw ( Figure 3-4 ).
803 H
Figure 3-4: M.2 Module Installation
Step 5: Replace the back cover and secure it using retention screws.
3.6 Clear CMOS