IEI Technology AFL4-W07-EHL, Руководство пользователя, Страница: 28 / 76

AFL4-W07-EHL Panel PC
Page 27
Step 3:
Line up the notch on the M.2 module with the notch on the connector. Slide the
M.2 card into the socket at an angle of about 20º.
Step 4:
Push the other end of the M.2 module down and secure the module with the
previously removed retention screw ( Figure 3-3 ).
Figure 3-3: M.2 Module Installation
3.6 Clear CMOS
If the AFL4-W07-EHL fails to boot due to improper BIOS settings, the clear CMOS Button
clears the CMOS data and resets the system BIOS information. To do this, push the clear
CMOS button for three seconds, then restart the system. The clear CMOS button location
is shown in Figure 3-4 .