IEI Technology AFL4-W07-EHL, Руководство пользователя

Страница: 35 / 76

AFL4-W07-EHL Panel PC
Page 34
3.8.3 Stand Mounting
To mount the AFL4-W07-EHL using the stand mounting kit, please follow the steps below.
Step 1:
Locate the screw holes on the rear of the AFL4-W07-EHL. This is where the
bracket will be attached.
Step 2:
Align the bracket with the screw holes.
Step 3:
To secure the bracket to the AFL4-W07-EHL insert the retention screws into the
screw holes and tighten them.
Figure 3-11: Stand Mounting (Stand-Cxx)
3.8.4 V-Stand Mounting
To mount the AFL4-W07-EHL using the optional V-Stand mounting kit, please follow the
steps below.
Step 1:
Carefully mark the locations of the four V-Stand screw holes on the mounting
area. Drill four pilot holes at the marked locations for the V-Stand retention
screws.