IEI Technology AFL3-W15C-ADLP, Руководство пользователя

Страница: 49 / 156

AFL3-W15C/W19C/W22C-ADLP
Page 33
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into the
four pilot holes and tightening them ( Figure 3-14 ).
Figure 3-14: Wall-mounting Bracket
Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the
four screw holes on the real panel of the flat bezel panel PC and tighten until the
screw shank is secured against the rear panel ( Figure 3-15 ).
WARNING:
Please use the M4 screws provided in the wall mount kit for the rear panel.
If the screw is missing, the thread depth of the replacement screw should
be not more than 4 mm.