IEI Technology AFL3-W15B-H81 Скачать руководство пользователя страница 34

Страница: 34 / 138

AFL3-W15B-H81 Panel PC

Page 20

Step 2:

Slide the back cover toward the I/O panel until it is disengaged from the locking

mechanism. Then, lift the back cover off the chassis.

Figure 3-2: Removing the Back Cover

Step 3:

To install the back cover, slide the back cover toward the top cover until the

external and internal locking mechanisms are both clipped into place. Then,

secure the back cover with the previously removed screws.

WARNING:

Over-tightening back cover screws will crack the plastic frame.

Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).

3.5 HDD Installation

To install the HDD into the AFL3-W15B-H81, please follow the steps below:

Step 1:

Remove the back cover. Refer to

Section 3.4

Step 2:

Remove the four HDD bracket retention screws and lift the HDD bracket off the

panel PC.

Содержание AFL3-W15B-H81











































































































































Результаты поиска

Содержание AFL3-W15B-H81

Отзывы:

IEI Technology AFL3-W15B-H81, Руководство пользователя, Страница: 34 / 138

Результаты поиска

Содержание AFL3-W15B-H81

Отзывы: