IEI Technology AFL3-W10A, Руководство пользователя

Страница: 34 / 142

AFL3-W10A/12A/W15A-BT Panel PC
Page 20
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL3-W10A/12A/W15A-BT may result in permanent damage to the
AFL3-W10A/12A/W15A-BT and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL3-W10A/12A/W15A-BT. Dry climates are especially susceptible to ESD.
It is therefore critical that whenever the AFL3-W10A/12A/W15A-BT is accessed internally,
or any other electrical component is handled, the following anti-static precautions are
strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the AFL3-W10A/12A/W15A-BT,
place it on an anti-static pad. This reduces the possibility of ESD damaging
the AFL3-W10A/12A/W15A-BT.

Only handle the edges of the PCB : When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the flat bezel panel PC, please follow the precautions listed below:

Power turned off : When installing the flat bezel panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.

Certified Engineers : Never open the equipment. For safety reasons, the
equipment should be opened only by qualified skilled person. Only certified
engineers should install and modify onboard functionalities.