IEI Technology AFL3-12A/W15A-BT, Руководство пользователя

Страница: 42 / 130

AFL3-12A/W15A-BT Panel PC
Page 28
 ATM
 Self-service kiosk
 Plant environment monitoring system
 Factory automation platform
 Manufacturing shop flow
3.10.2 ATX Power Mode
With the ATX mode selected, the AFL3-12A/W15A-BT panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
3.11 COM1 Connection
The COM1 port is a RJ-45 serial device connector on the bottom panel. The COM1 port
connects to a cable with a standard D-sub 9 connector at the other end (cables included).
Follow the steps below to connect a serial device to the AFL3-12A/W15A-BT panel PC.
Step 1: Locate the RJ-45 connector
. The location of the RJ-45 serial port connector is
shown in
Chapter 1
. The RJ-45 connector for the serial port can be identified
easily as the RJ-45 for the network has two LEDs on the port, while the
connector for the serial cable don’t.
Step 2: Insert the RJ-45 to D-sub 9 cable.
See
Figure 3-14
.