IEI Technology AFL2-12A-HM65 Series, Руководство пользователя

Страница: 64 / 186

AFL2-12A-HM65 Series Panel PC
Page 64
5.1 System Maintenance Introduction
If the components of the AFL2-12A-HM65 fail they must be replaced. Components that
can be replaced include:

SO-DIMM module

WLAN Module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFL2-12A-HM65 are described below.
5.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL2-12A-HM65 may result in permanent damage to the
AFL2-12A-HM65 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL2-12A-HM65. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL2-12A-HM65 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.

Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : - When configuring the AFL2-12A-HM65, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL2-12A-HM65.

Only handle the edges of the PCB : - When handling the PCB, hold the PCB
by the edges.