IEI Technology AFL2-12A-D525 Series, Руководство пользователя

Страница: 60 / 180

AFL2-12A-D525 Series Panel PC
Page 60
Pin Description Pin Description
4 RTS3 8 RI3
Table 4-2: Ethernet Connector Pinouts
Figure 4-21: Ethernet Connector
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
AFL2-12A-D525 panel PC.
Step 1: Locate the RJ-45 serial port . The location of the RJ-45 serial port is shown in
Chapter 2 .
Step 2: Connect the RJ-45 to COM port cable to the panel PC . Insert the RJ-45
connector end of cable into the RJ-45 serial port. See Figure 4-22
Step 3: Connect the serial device. Connect a serial device to the DB-9 connector end
of the cable. See Figure 4-22
Figure 4-22: RJ-45 Serial Port Connector
Step 4: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0: