IEI Technology AFL2-12A-D525 Series Скачать руководство пользователя

Страница: 138 / 180

AFL2-12A-D525 Series Panel PC

Page 138

C.2.1 Hardware and BIOS Setup

Step 1:

Make sure the system is powered off and unplugged.

Step 2:

Install a hard drive or SSD in the system. An unformatted and unpartitioned disk

is recommended.

Step 3:

Connect an optical disk drive to the system and insert the recovery CD.

Step 4:

Turn on the system.

Step 5:

Press the <

DELETE

> key as soon as the system is turned on to enter the BIOS.

Step 6:

Select the connected optical disk drive as the 1

boot device. (

Boot



Boot

Device Priority



Boot Device

Step 7:

Save changes and restart the computer. Continue to the next section for

instructions on partitioning the internal storage.

C.2.2 Create Partitions

To create the system backup, the main storage device must be split into two partitions

(three partitions for Linux). The first partition will be for the operating system, while the

second partition will be invisible to the operating system and contain the backup made by

the one key recovery software.

Step 1:

Put the recovery CD in the optical drive of the system.

Step 2:

Boot the system from recovery CD

. When prompted, press any key to boot

from the recovery CD. It will take a while to launch the recovery tool. Please be

patient!

Содержание AFL2-12A-D525 Series





















































































































































































Результаты поиска

Содержание AFL2-12A-D525 Series

Отзывы:

Похожие инструкции для AFL2-12A-D525 Series

Бренды по названию

Популярные бренды

IEI Technology AFL2-12A-D525 Series, Руководство пользователя

Результаты поиска

Содержание AFL2-12A-D525 Series

Отзывы:

Похожие инструкции для AFL2-12A-D525 Series

Бренды по названию

Популярные бренды