IEI Technology AFL M Series Скачать руководство пользователя страница 23

Страница: 23 / 227

AFL M Series LCD Monitor

Page 3

1.1 AFL M Series LCD Monitor Overview

The AFL series industrial monitor is the latest member of IEI’s line of sophisticated LCD

designs, and it has been improved to be RoHS compliant. The AFL series is designed to

fit industrial automation, or any other applications that require minimum installation

space and flexible configuration. The flat front panel provides IP 64 protection, which

effectively wards off dust and water. Flexible analog or digital interfaces are provided for

ease of connection with a management computer. Resistive type touch panels are

optional. If remote/non-attentive control is preferred, RS-232 or USB interfaces can be

used with customized adapter cables.

1.1.1 Added Features

The following features have been added to the

Revision 11

models described in this

manual:

7” to 12.1” models all have both RS-232 and USB touch screen options

integrated into a single system.

15” – 19” have both USB touch screen models and RS-232 touch screen

models.

New firmware for the IEI smartOSD function is integrated into all

revision 11

(and above) AFOLUX monitors in the AFOLUX series.

1.1.2 Standard Features

Some of the features of the AFL series industrial monitor include:

7”/8.4”/10.4”/12.1”/15”/17”/19” TFT LCD

Picture in Picture (PiP) support

Fully functional OSD remote control

Built-in speakers

Multiple input interfaces including

Analog VGA

Audio line-in

Component Video

S-Video

Composite

Содержание AFL M Series




































































































































































































































Результаты поиска

Содержание AFL M Series

Отзывы:

IEI Technology AFL M Series, Руководство пользователя, Страница: 23 / 227

Результаты поиска

Содержание AFL M Series

Отзывы: