IEI Technology AFL-517A-GM45, Руководство пользователя

Страница: 46 / 136

AFL-517A-GM45 User Manual
Page 46
Figure 2-19: Install into a Rack/Cabinet
Step 5:
Once the flat panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (
Figure 2-19
).
2.8.4 Arm Mounting
The AFL-517A-GM45 is VESA (Video Electronics Standards Association) compliant and
can be mounted on an arm with a 100 mm interface pad. To mount the AFL-517A-GM45
on an arm, please follow the steps below.
Step 6:
The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant with a
100 mm interface pad. If the mounting arm is not VESA compliant it cannot
be used to support the AFL-517A-GM45 flat panel PC.