IEI Technology AFL-056A-LX, Руководство пользователя, Страница: 49 / 121

AFOLUX LX Panel PC
Page 33
than the overall size of the metal frame that surrounds the flat panel PC but just
large enough for the rear panel of the flat panel PC to fit through (
Figure 3-7
).
Figure 3-7: Panel Opening
Step 11:
Slide the flat panel PC through the hole until the aluminum frame is flush against
the panel.
Step 12:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the aluminum frame. There are a total of 4 panel mounting
clamps on the AFOLUX LX.
Step 13:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (
Figure 3-8
).
S te p 0 :