IEI Technology ACT-457A, Руководство пользователя

Страница: 45 / 67

ACT-457A Panel PC
Page 37
Step 2: Select a Mifare mode.

0-UUID: read serial number only.

1-UUID & KEY A: read serial number and use "KEY A" to read "Block' data".

2-UUID & KEY B: read serial number and use "KEY B" to read "Block data".
Step 3: Configure the block number, and key data ( Figure 3-5 ).
Step 4: Click the Execute button to execute the command through the selected serial
port ( Figure 3-5 ). The raw data of this command shows in the Raw Data area in
the format listed in Table 3-7 and Table 3-8 . Step 0:
Figure 3-5: Set Mifare Parameter
Field Command Access Mode Block KEY Data End
Digit 2 1 2 12 1
Data SM 0~2 00~63 000000000000
︴
(Hex)
FFFFFFFFFFFF
CR (0x0d)
Table 3-7: Set Mifare Parameter Raw Data Format