IEI Technology 167320, Руководство пользователя

Страница: 61 / 79

WAFER-JL-N5105 SBC
Page 49
4.3 SO-DIMM Installation
To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation
Step 1:
Locate the SO-DIMM socket . Place the board on an anti-static mat.
Step 2:
Align the SO-DIMM with the socket . Align the notch on the memory with the
notch on the memory socket.
Step 3:
Insert the SO-DIMM . Push the memory in at a 20º angle. (See Figure 4-1 )
Step 4:
Seat the SO-DIMM . Gently push downwards and the arms clip into place. (See
Figure 4-1 )
CAUTION :
For dual channel configuration, always install two identical memory
modules that feature the same capacity, timings, voltage, number of
ranks and the same brand.