REV: 03-11
DOC1302B
PAGE
1
INSTALLATION INSTRUCTIONS
LC21HS INTERCOM HANDSET
LC21HS
INTERCOM HANDSET
Installation Instructions
INTRODUCTION
The LC21HS handset is an optional component of the LANcom SCS system. It may be used with either the LC331IC
or the LC372SR communications modules. It allows an intercom call to switch from public mode to private mode by
transferring the room microphone and loudspeaker to the handset for the duration of the call. The overhead loud-
speaker is disconnected automatically when the handset is lifted from its cradle. The LANcom SCS system restores the
loudspeaker operation when the handset is returned to the cradle or when a
public mode
announcement is made or bell
signal is played.
The LC21HS features a contemporary style handset with integral coiled cord and a hook switch, mounted on a 2-gang
plate. The handset connects to the communications module by way of CAT5 or better structured cable, terminated in
RJ-45 connectors.
Figure 1 -
LC21HS Front View
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Install in accordance with the manufacturer’s in-
structions.
8.
Do not install near any heat sources such as ra-
diators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.
Only use attachments/accessories specified by the
manufacturer.
10.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or ob-
jects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
SAFETY SYMBOLS
Labeling on products and the
Installation Instructions &
User Manual
may use safety related graphical symbols
as shown below to note safety requirements.
Lightning Bolt:
The lightning flash with
arrowhead symbol, within an equilateral triangle,
WARNING symbol, is intended to alert the user to
the presence of un-insulated
dangerous voltage
within the product’s enclosure that may be
sufficient in magnitude to constitute a risk of
electric shock to persons or domestic animals.
Exclamation Point:
The exclamation point
within an equilateral triangle, CAUTION symbol,
is in-tended to alert the user to the presence of
important operating and maintenance (servicing)
instructions, or a hazard that can damage equip-
ment.
Do not proceed beyond a WARNING or CAUTION notice
until you have understood the hazardous condition and
have taken appropriate steps.
