IECHO BK4 Series, Руководство пользователя

Страница: 16 / 29

后
前
腰型槽
圆柱销
provide power for computer console, vacuum cleaner, milling cutter, feeding rack, etc.
2.3.
Air supply
An air source interface is set at the back of the equipment electrical box, and a 12mm diameter air
pipe needs to be used to connect the "main air source inlet". Note: if the equipment is equipped with
additional functions such as milling cutter and pneumatic vibrating cutter, the corresponding air source
interface of the electrical box can be used; If there is no additional configuration, be sure to keep the
interface closed to avoid air leakage affecting the normal use of the equipment.
2.4.
Cutting head installation

Tilt the machine head to the support plate on the beam, and the bottom of the machine head is close
to the mounting surface of the support plate. Make sure that the waist groove on the back of the head