Installer Setup
19
Maximum Override Time
(setup step 16)
This feature limits the maximum override time
when using the OVERRIDE button 1 - 4 hours.
Fahrenheit or Celsius
(setup step 17)
This feature allows the thermostat to display
temperature in Fahrenheit or Celsius.
Fan Auto Operation
(setup step 18)
ON = Continuous low speed fan
OFF = Only energize with a heating or
cooling cycle
This step is useful when using a duct
sensor to keep airflow for the sensor.
Fan Relay Type
(setup step 19)
• Normal = Conventional 3 speed fan coil
system
• Special = Carrier or IEC Fan Coil using a
33ZCRLYBRD Relay Board
Wired Sensor Type
(setup step 20)
RETURN, OUTDOOR, SUPPLY = the sensor
temperature is reported to Skyport to
monitor only
REMOTE = the sensor can be used for
temperature control.
