![IEB Filon FUTURE Скачать руководство пользователя страница 2](http://html.mh-extra.com/html/ieb/filon-future/filon-future_quick-manual_619062002.webp)
Quick Guide Filon FUTURE charger
Rev. 1.05
2
Safety advices
Requirements on the place of use
The charger must only be used in closed, frost-free and dry rooms. The ambient temperatures
at the place of use must not fall below 0°C/32°F and not exceed 40°C/104°F.
The place of use must not be exposed to excessive dust. The occurrence of electro conductive
dusts (salt, soot, metals) must be excluded.
The place of use must be adequately ventilated so that the resulting charging gases can be
distributed or diluted and the occurrence of explosive gas mixtures is prevented.
The place of use must be chosen in such a way that the ventilation openings are not covered
and the cooling air flow is not blocked. Do not place the charger near radiators or other heat
sources. Heat accumulation at the charger, e. g. by blocking the ventilation openings, must be
excluded.
The distance to explosion- and explosion-hazardous areas must be at least 5m/16ft.
If the charger is designed as a stationary unit, it must be placed on the housing stand.
Personnel qualification
The charger may be used by children from 8 years of age and older as well as by persons with
reduced physical, sensory or mental abilities or lack of experience and knowledge.
This applies as long as they have been supervised or instructed in the safe use of the charger
and have understood the related dangers.
Children are not allowed to play with the charger.
The charger (including the charging cable) must not be opened, replaced or manipulated.
If the charger's power cord is damaged, it must be replaced by the customer service or a simi-
larly qualified person. The same applies to the replacement of fuses.
General safety advices
Connect the charger only to a properly installed earthed socket.
The charger must not be connected to the mains supply in case of a defect or must be discon-
nected immediately by pulling the mains plug.
Unplug the unit when not in use.