IDUINO for maker’s life
www.openplatform.cc
Now, simply click the "Upload" button in the environment. Wait a few seconds - you
should see the RX and TX LEDs on the board flashing. If the upload is successful, the
message "Done uploading." will appear in the status bar. (Note: If you have an Arduino
Mini, NG, or other board, you'll need to physically press the reset button on the board
immediately before clicking the upload button on the Arduino Software.)
A few seconds after the upload finishes, you should see the pin 13 (L) LED on the
board start to blink (in orange). If it does, congratulations! You've gotten Arduino up-
and-running.