IDTI IN-CELL TOUCH 215P, Руководство пользователя

Страница: 7 / 36

idti
IN-CELL TOUCH 215P
7 / 36
●
Avoid the monitor coming into collision with other objects. Also, do not scratch the screen surface, as it is
extremely delicate.
Maintenance
●
Please be sure to unplug the power connector before cleaning.
●
Use a soft, clean cloth to wipe the outer casing, glass and control buttons. Do not use any cleansers which
contain solvents, or corrosive ingredients, such as alcohol and benzene.
●
Keep sharp or invasive objects, such as pencils or screwdrivers, away from the screen, as these will scrape
and damage the screen.
●
Do not insert objects or spill liquid onto the ventilation outlet, as this may lead to fires, electrical shocks, or
malfunctioning of parts.
●
Do not attempt to self-repair this product, as unsupervised opening or removal of the protection casing can
induce electrical shocks, or other hazards.
Transportation
If the product needs to be transported for maintenance, please ship it in its original packaging case.
Wall Mounting
The four holes on the back of the monitor conform entirely to VESA FRMPMI Standards, and can either be
wall-mounted, or used with monitor arms. The 21.5＂ panel weights approximately 6 kg, and should be
installed as follows:
1. Take out the support rack (on the back).
2. Note that there are four M4 screw holes on the base, which conform entirely to VESA FRMPMI Standards,
at 100 *100 mm.
Note：This product does not come with screws or other mounting devices.
Package Contents
Upon opening the packaging case, please check the contents to see that the following are included:
LCD Monitor