16
Quick Installation Guide
9. SYSTEM INITIALIZATION
※
WARNING: It will initialize all the values of the products to factory default.
9.1 Initialization using the command
9.2 Hardware Initialization (When the master card or ID is lost)
If you have lost the Configuration Card or if you forget the Master PIN number,
you may need to re-initialize.
the unit for new setup. There is a hard-wired Initialize function on the unit.
1) Open the top case taking out four bolts on the back.
2) As the left picture, make two jumpers short in state
of being on power
3) 3-color LED blinking with beep sound indicates
success of initialization
4) Turn off the power
5) Reinstall the Top case
1) Present a Master RF card close to the product
2) Press the ‘ENT’ button after pushing
the ‘9’ button twice
3) All data will be deleted after initialization
