User Manual
4
2
．
RF900I-8 Configurations
2.1 Initial Use
2.1.1 Step 1: Powering the reader
Plug the
power cable
in, with the
indicator light
on and sound of a short
beep
, reader is ready.
2.1.2 Step 2: Connecting Antenna(s) to reader
Connect the antenna(s) with the antenna port:
2.1.3 Step 3: Connecting Data Line to Reader
Method NO.1:
You can connect the reader to your PC via RS-232 serial port:
Method NO.2:
You can also connect the reader to your PC via TCP/IP:
2.1.4 Step 4: Operating Reader via Demo
Put the
UHFDemo.exe
,
reader.dll
,
customControl.dll
into the same folder, and double-click
UHFDemo.exe
to run the software.
Open the software and it will shows as below:
