VP5300 User Manual
Page | 9
2.
VP5300 Specifications
Physical
VP5300 Dimensions
136.2 mm from back of mounting surface x 102.8 mm flange
width x 72.6 mm flange height (LxWxH)
NFC Antenna Bezel Dimensions
65mm x 54mm x 14.5mm (LxWxH), plus 15.5mm-deep M4
studs protruding from the back of the unit
Structure Material
Plastic, PC UL 94V-0
Housing Color
Black
Weight
0.7 kg
Bezel
Metallic, stainless steel look
Water drain feature allows liquids to drain
Cable management
Cables and connectors should be recessed from the case’s
rear surface and facing backwards
Electrical
Voltage Requirement
12V DC (minimum) recommended to 24V maximum
Environmental
Operating Temperature
-25° C to 65° C (-13° F to 158° F), max change of 10° C per
hour
Storage Temperature
-40° C to 80° C (-40° F to 185° F)
Operating Humidity
10% to 95% non-condensing
Storage Humidity
10% to 95% non-condensing, duration 3 months
Transit Humidity
5% to 95% non-condensing, duration 1 week
Operating Environment
Water resistant for indoor and outdoor use
IK Rating
IK 10
IP Rating
IP 65
ESD
(Device)
Contact ±6kV
Air discharge ±12kV
ESD (Mag head only)
Contact ±6kV
Air discharge ±12kV
Durability and Reliability
Magnetic Head
1,000,000 swipes minimum
Rail
1,000,000 swipes minimum
Smartcard connector
1,000,000 cycles minimum
Impact Resistance
Pass IK 10 testing
Ingress Resistance
Pass IP 65 rating
NFC Antenna Hardware Specifications
MTBF
466,000 hours
Receiver Subcarrier Data
ISO 14443-2 Type A: Modified Manchester ISO 14443-2 Type
1
Note:
Cables and connectors must be fully isolated with insulating material to prevent ESD discharge.
