VP5300 User Manual
Page | 25
7.
LED Management
There are two LEDs. One is the user-interface LED on the front bezel of the reader; the other
(diagnostic) LED is on the back.
Front LED Status
•
The LED turns green in idle waiting.
•
LED handling for Magstripe card operation:
o
The LED will turn red to indicate that the recent magstripe card read was bad.
•
LED handling for smart card operation:
o
The Green LED will flash after powering on the smart card.
o
The solid Green LED indicates smart card processing is complete and the ICC powered
off. The user can remove the smart card.
State
LED
Indicating
0
Off
No external power
1
Flashing
Green
Powering on the smart card and starting smart card operation
2
Solid
Green
Idle waiting (Smart card processing is complete and the ICC
powered off. User can remove the smart card. If the transaction
mode was MSR,
magstripe card data is sent out.)
3
Solid Red The recent magstripe card read was bad. Red lasts 1 second.
