IDTECH vivopay kiosk iii, Руководство пользователя, Страница: 6 / 24

ViVOpay Kiosk III User Manual
Page 6 of
24
Comparison of SRED (Secure Reading and Exchange of Data) version of Kiosk III with non-
SRED (standard or 'NSRED') version:
Feature NSRED (Standard) SRED
02-01 command (non-
encrypted Activate
Transaction)
Supported (unless encryption is
turned on)
Not supported
02-40 command
(encryption-compatible
Activate Transaction)
Supports plaintext output and
encrypted output
Only supports encrypted output
03-00 command
03-00 command not supported if
encryption is enabled
Not supported at any time
03-40 command Supports plaintext output. Only supports encrypted output
Encryption Switch
(C7-36/37 commands)
Yes No
MAC Key Not supported Supported
Encryption Type AES and TDES available
TDES only
SRED uses only TDES to encrypt
transaction sensitive data to meet PCI
requirements
SAM Not supported Supported
Pass-Through Mode
Output
Always Plaintext
1. Output plaintext if no sensitive data.
2. According to white list:
a. If the AID is in white list, output
plaintext message.
b. If the AID is not in the white list, no
output.
USB
VID: 0x0ACD
PID: 0x3710 VID: 0x0ACD
PID: 0x2830
Burst Mode setting
If MSD/EMV encryption is ON
and Data Key exists, then reader
is in encryption mode, and Burst
Mode is forced to be off.
Burst Mode always off.
FW version Kiosk III VX.YY.ZZZ Kiosk III VX.YY.ZZZ.S
Self-Check
1. Supports self-check when
power is on.
2. No periodic 24-hour self-check
1. Support self-check when power on.
2. Supports periodic 24-hour self-check
Tamper Detection and
Data Zeroization
Not supported
Supported. If device is tampered, reader
will erase all sensitive data and enter
deactivated state. (Unit will then do
nothing except keep beeping and waiting
for activate commands.)