IDTECH SmartPIN K100 3.X, Техническое справочное руководство

Страница: 19 / 24

Copyright © 2019, International Technologies & Systems Corp. All rights reserved.
Page 19 of 24

Device enters into “Want Fix / Removal Device State”.

Device beeps always, the User need modify passwords. Please do Step2

If there are two User Activation Passwords in device.

Device beeps Normal Tone and enters into “Want Fix / Removal Device State”.

The User can press password.
Step2. Modify Loading Key passwords

One Default Loading Key Password is 123456. Another Default Loading Key Password is
654321. All passwords need be numeric key.

The process is:

Step2.1 Press Default Loading Key Password once and device will beep Complete Tone .
(If the first numeric key is pressed, Device will stop Always beeps).

Step2.2 Press New Password first times, and device will beep Complete Tone . (New
Password need not be same as Default Loading Key Password.)

Step2.3 Press New Password second time, and device will beep Complete Tone .

If the password is modified successfully, Device beeps Complete Tone and the New
Password is a User Loading Key Password.

If another Password is Default Loading Key Password, beeper will beep always. Then User need
not Re-Power on device (unplugging device) and can do above Process (Step2.1 ~ Step 2.3) to
modify another Default Password.

If 2 Password all be modified to User Activation Password, device quit “Want Loading Key
State”.

Interval:

The Interval between Password1 and Password2 is 2 Minutes.

The Interval between the two keys of a password is 10 Seconds.

Any key will have a short tone to be acknowledged tone.
Step3. Press User Activation Key Password

If the User presses 2 User Loading Key Passwords

A User Password is pressed correctly, Device beeps Normal Tone

Another User Password is pressed correctly, Device beeps Normal Tone

Device confirms 2 User Passwords correct:

If Device is Fixed and IN Fixed State : Device beeps Complete Tone , Active Removal
Device successfully , save 2 Records for Active Removal Device, and quit “Want Fix /
Removal Device State”. Then device can be removal legally and secure data are not erased.

If Device is Fixed and IN Removal State : Device beeps Device IN Removal State Tone
and quits “Want Fix / Removal Device State”.

If the User presses at least an incorrect User Activation Password, Device beeps Invalid Tone
and the User can presses again.

If the User presses incorrect User Activation Password 3 times, Device beeps Invalid Tone and
Suspend 3 Minutes. After Device finished suspend, Device quits “Want Fix / Removal Device
State”.

Interval:

The Interval between Password1 and Password2 is 2 Minutes.

The Interval between the two keys of a password is 10 Seconds.