1
12
12
1
MAGNETIC STRIPE DEFAULT SETTINGS TABLE
The reader is shipped from the factory with the following magnetic stripe default
settings already programmed:
Magnetic Track Basic Data Format
Track 1: <SS1><T
1
Data><ES><CR>
Track 2: <SS2><T
2
Data><ES><CR>
Track 3: <SS3><T
3
Data><ES><CRLF>
where:
SS1(start sentinel track 1) = %
SS2(start sentinel track 2) = ;
SS3(start sentinel track 3) = ; for ISO, ! for CDL, % for AAMVA
ES(end sentinel all tracks) = ?
Start or End Sentinel: Characters in encoding format which come before the first
data character (start) and after the last data character (end), indicating the begin-
ning and end, respectively, of data.
Track Separator: A designated character which separates data tracks.
Terminator: A designated character which comes at the end of the last track of
data, to separate card reads.
LRC: Check character, following end sentinel.
CDL: Old California Drivers License format.
MAGNETIC STRIPE DEFAULT SETTINGS TABLE
The reader is shipped from the factory with the following magnetic stripe default
settings already programmed:
Magnetic Track Basic Data Format
Track 1: <SS1><T
1
Data><ES><CR>
Track 2: <SS2><T
2
Data><ES><CR>
Track 3: <SS3><T
3
Data><ES><CRLF>
where:
SS1(start sentinel track 1) = %
SS2(start sentinel track 2) = ;
SS3(start sentinel track 3) = ; for ISO, ! for CDL, % for AAMVA
ES(end sentinel all tracks) = ?
Start or End Sentinel: Characters in encoding format which come before the first
data character (start) and after the last data character (end), indicating the begin-
ning and end, respectively, of data.
Track Separator: A designated character which separates data tracks.
Terminator: A designated character which comes at the end of the last track of
data, to separate card reads.
LRC: Check character, following end sentinel.
CDL: Old California Drivers License format.
AGENCY APPROVED
Specifications for subpart B of part 15 of FCC rule for a Class A computing
device.
LIMITED WARRANTY
ID TECH warrants this product to be in good working order for a period of one
year from the date of purchase. If this product is not in good working order as war-
ranted above, or should this product fail to be in good working order at any time
during the warranty period, repair or replacement shall be provided by ID TECH.
This warranty does not cover incidental or consequential damages incurred by
consumer misuse, or modification of said product. For limited warranty service
during the warranty period, please contact ID TECH to obtain an RMA number
and instructions for returning the product.
©2006 International Technologies & Systems Corporation. The information
contained herein is provided to the user as a convenience. While every effort has
been made to ensure accuracy, ID TECH is not responsible for damages that might
occur because of errors or omissions, including any loss of profit or other com-
mercial damage. The specifications described herein were current at the time of
publication, but are subject to change at any time without prior notice.
ID TECH is a registered trademark of International Technologies & Systems
Corporation. Omni and Value through Innovation are trademarks of International
Technologies & Systems Corporation.
AGENCY APPROVED
Specifications for subpart B of part 15 of FCC rule for a Class A computing
device.
LIMITED WARRANTY
ID TECH warrants this product to be in good working order for a period of one
year from the date of purchase. If this product is not in good working order as war-
ranted above, or should this product fail to be in good working order at any time
during the warranty period, repair or replacement shall be provided by ID TECH.
This warranty does not cover incidental or consequential damages incurred by
consumer misuse, or modification of said product. For limited warranty service
during the warranty period, please contact ID TECH to obtain an RMA number
and instructions for returning the product.
©2006 International Technologies & Systems Corporation. The information
contained herein is provided to the user as a convenience. While every effort has
been made to ensure accuracy, ID TECH is not responsible for damages that might
occur because of errors or omissions, including any loss of profit or other com-
mercial damage. The specifications described herein were current at the time of
publication, but are subject to change at any time without prior notice.
ID TECH is a registered trademark of International Technologies & Systems
Corporation. Omni and Value through Innovation are trademarks of International
Technologies & Systems Corporation.
