IDT ZWIR4532, Руководство пользователя

Страница: 5 / 22

ZWIR4532 Evaluation Kit User Manual
© 2018 Integrated Device Technology, Inc. 5 November 1, 2018
2. Setup
2.1 Computer Requirements
Windows 7, Windows 8 and Windows 10; 32-bit and 64-bit are supported. The selection of the development program may limit these choices.
2.2 Setting the Evaluation Kit to Interface the Computer
The connection to the evaluation kit is via the computers USB port operating as a serial COMx device. This driver needs to be installed prior to
plugging this Evaluation Kit into the PC. ST Micro provides the driver to do this.
1.
Connect to www.st.com.
2. In search tab in the upper right corner enter ST-LINK/V2.
3. Click on the STSW-LIN009 option.
4. On the bottom of the page, select the Get Software option and follow the instructions.
5. ST Micro will ask for some information to execute the download.
6. Unzip the download.
7. Execute the resulting .bat file to permit installing the correct version (32-bit or 64-bit).
When the evaluation kit is plugged into the PC, the COM LED on the Programming Link part of the board will illuminate:

Flashing indicates the USB connection is not correct

Continuously on indicates a working USB connection
The Control Panel and the Device Manager option on the PC will show the connection and the COM port being used. For example, this shows
a COM4 connection:
Typical port settings will default to: