IDT ZNRG2061, Руководство пользователя

Страница: 5 / 18

ZNRG2061 Evaluation Kit User Manual
© 2017 Integrated Device Technology, Inc. 5 March 29, 2017
1.3 Kit Hardware Connections
Set up the Evaluation Kit connections as shown in Figure 2. Refer to Table 1 below for the description.
Figure 2. ZNRG2061 Evaluation Board Overview
5
4
6
3
1
7
2 8
9
10
11
Table 1. Evaluation Board Key Components and Functions
Note: See Figure 2 for the number references used in this table. Also see the schematics in section 3.
Ref. Name Connector Label Function
1 USB Connector J3 This connector is used to connect the Evaluation Board to the user’s computer via
the micro-USB cable. Wait until the instructions in section 1.4 to make this
connection.
2
INP I+ (X2-7 pin on X2)
Connect INP and INN to the leads for the secondary of the current transformer.
See Figure 4.
INN I- (X2-8 pin on X2)
3 FAKE-ARC J2 Pushbutton for Arc Fault Test signal creation.
4 RESET J1 Pushbutton to reset the ZNRG2061.