IDT 89EBPES16NT2, Руководство пользователя

Страница: 17 / 36

IDT Installation of the EB16NT2 Eval Board
EB16NT2 Eval Board Manual 2 - 7 November 13, 2007
Notes
JTAG Header
The PES16NT2 provides a JTAG connector J4 for access to the PES16NT2 JTAG interface. The
connector is a 2.54 x 2.54 mm pitch male 10-pin connector. Refer to Table 2.8 for the JTAG Connector J4
pin out.
Miscellaneous Jumpers, Headers
LEDs
There are several LED indicators on the EB16NT2 which convey status feedback. A description of each
is provided in Table 2.10.
JTAG Connector J5
Pin Signal Direction Pin Signal Direction
1 /TRST - Test reset Input 2 GND —
3 TDI - Test data Input 4 GND —
5 TDO - Test data Output 6 GND —
7 TMS - Test mode select Input 8 GND —
9 TCK - Test clock Input 10 GND —
Table 2.8 JTAG Connector Pin Out
Miscellaneous Jumpers, Headers
Ref.
Designator
Type Default Description
W12 Header Shunted Disable EEPROM Write protect feature (Default)
W2 Header Open Force remote (PCIe Cable) power on
W32 Header Open Tie PCIe Cable 3.3V power to on board VCC_3V3
Table 2.9 Miscellaneous Jumpers, Headers
Location Color Definition
DS2 Green VCC_3V3Power indicator
DS1 Red Reset
DS4 Green GPIO0
DS29 Green GPIO3
DS30 Green GPIO5
DS31 Green GPIO7
DS33 Green GPIO2
DS34 Green GPIO4
DS35 Green GPIO5
DS29 Green GPIO9
Table 2.10 LED Indicators (Part 1 of 2)