3
©2017 Integrated Device Technology, Inc.
October 20, 2017
MicroClock
®
5x2503 Family Development Kit User Guide
Figure 3. Socket Daughter Board (pin position)
Programming Steps
Use programming steps 2 – 7 as described in the
Table 3
to program a configuration into the blank part in the specified socket daughter
board.
Table 3. Programming Steps
Step Number
Step Description
Comments
0
A configuration has been validated and
completed on the development kit.
Configurations should have been validated on the USB mother board
and are ready to proceed for programming on blank parts.
1
All intended outputs should be available for
measurement on the USB development kit.
Upon validation of the outputs, “Disconnect” the USB board and
proceed for OTP burn as explained in the following sections.
2
Plug the specified socket daughter board
onto the USB mother board (shown in
Figure 2
).
USB mother board with the socket daughter board provides a
communication channel between the GUI and a blank part in the
socket daughter board.
3
Start Timing Commander software (this step
can be skipped if a configuration is ready in
the personality).
Launch the Timing Commander GUI software. Load the personality file.
Pin 1 Orientation
