© 2009 IDS Imaging Development Systems GmbH
114
User Manual uEye Cameras V3.32
Figure 91: uEye Player operation controls
1
Position markers for the defined playback loop
2
Current position in video file
3
Size of the video display window in pixels
4
Current frame number
5
Number of frames in video file
6
Volume control
7
Frame display parameter settings. Each slider can be reset to its default setting by clicking it
with the right mouse button. The settings are also applied to the subsequent files.
8
Current playback speed setting
9
Playback speed in relation to the recording speed from 0.1 to 200 fps. The values are set in
increments.
Using the
button, you can jump directly to a specific frame. To do so, enter a numerical value
between 1 and the total number of frames in the video sequence.
Figure 92: Jump to specific frame
8.3.4
Loop Mode
When using the
uEye Player
, you can select specific periods of time within the video sequence and
play them back in an endless loop. To do this, click the
button. This enables the two icons for
