A: Program your Power Sockets
1.
Before you can transmit an RF command, the
Gateway must be trained for this command and
paired with the Power Sockets in the following way:
2.
Select [Commands] in the Main Menu, select [RF],
select [433MHz Socket learnable] and press
[GENERATE] for pairing a power socket to the
Gateway.
3.
RF Commands
3.
Click the [SEND] button, the LED will stop blinking.
IMPORTANT: If the LED/button of the Power Socket does not blink,
repeat the process, unplug, and plug in the power socket while pressing down
the LED/button.
5.
If the LED/button at the side of the socket turned static
red, the socket is powered on and you can connect a
lamp.
6.
You may notice that [RF 1] and [RF 2] has been
automatically renamed while pairing to [KT- on] and
[KT- off], respectively to switch the power socket ON
and OFF with the virtual keypad.
7.
Follow the instruction. Take the power socket and
press down the LED/button unit at the side of the
socket while plugging into mains power. Keep the
button pressed for 3 seconds! If you release the
LED/button, the LED will blink.
6.
You can even assign a location for your socket and
rename it.
©
2
0
2
0
Int
ell
ig
ent
D
ig
ita
l S
erv
ic
es
G
m
bH V
e
rs
io
n
1
.0
Note: Please press [SAVE] for changes
7.
Under [Scenes], you can easily use the
virtual keypads to control your power
sockets.
