Quick Installation Guide 1.0
SMART HOME STARTER KIT
SMT
CORE GATEWAY V1
Unbox your SMTCore Gateway V1:
1 x Gateway V1.
1 x 5V USB Power socket and 1 x 5V USB Cable.
2 x 433 MHz controlled power sockets.
2 x 433 MHz wall light switches battery operated.
Connect the 5V USB power supply to the Gateway V1.
The device will beep once, and the red LEDs will blink until the boot-up process is completed.
Note: Remove the safety strips from the 433 MHz wall light switches. In case you need to open them to replace the batteries, a credit
card size will fit to remove the pushbutton.
1. Power On
2.
Setup
A: Log in to your Gateway
1.
Use our Android Application [IDS_Gateway.apk] or
connect your computer or smartphone to the
Gateway’s network with the password 123456789. If
you are using a computer, unplug the Ethernet cable, if
any.
©
2
0
2
0
Int
ell
ig
ent
D
ig
ita
l S
erv
ic
es
G
m
bH V
e
rs
io
n
1
.0
GatewayV1
….
2.
Launch a web browser, and enter
in the address bar
or scan for
3.
The following [LOGIN] page will start. Enter
the default password admin to log in.
Note: If this login window does not appear, make sure you
have selected the Gateway in your Wireless Network.
4.
You are logged into the Gateway for the
first time, please change the password.
admin
admin
