2020-12-08
20
IDS NXT: Setup IDS NXT rome
·
New vision app versions can be downloaded from the download section of the IDS website:
. Use the IDS NXT cockpit to update the vision apps on the camera.
There are no more vision apps available on the camera after resetting to factory defaults?
·
Resetting to factory defaults resets the camera to the firmware without vision apps. You need to reinstall the
vision apps. You can download the vision apps in the download area of the IDS website:
10.1 Booting the camera in service firmware
Use the "ids_devicecommand" tool to boot the camera in the service firmware. The "ids_devicecommand" tool
can be found in the installation directory of the IDS NXT cockpit, e.g. under "C:/Program
Files/IDS/ids_nxt_cockpit_2_0/visiontools".
Fig. 7: Boot service firmware
1. Open the "ids_devicecommand" tool at the command prompt.
2. You can first display all available cameras to identify the serial number:
ids_devicecommand --list-devices
3. You use the serial number to define which camera should boot into service firmware:
ids_devicecommand -s 4103616675 --reset-to-service
The camera powers off briefly and boots in the service firmware.
10.2 Resetting the camera to factory settings
After the camera is booted in the
, you can reset the camera to factory settings with the IDS
Vision Cockpit.
After the camera is booted in the service firmware, you have to call the command to reset the
camera within 60 seconds.
Use the "ids_devicecommand" tool to reset the camera to the factory settings. The "ids_devicecommand" tool
can be found in the installation directory of the IDS NXT cockpit, e.g. under "C:/Program
Files/IDS/ids_nxt_cockpit_2_0/visiontools".