![IDS NXT rome Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/ids/nxt-rome/nxt-rome_setup-instructions_3770006011.webp)
2020-12-08
11
IDS NXT: Setup IDS NXT rome
6 Electrial specifications
·
Pin assignment GigE connector (M12)
·
6.1 Pin assignment GigE connector (M12)
8-pin M12 socket (M12 connector: MMT361A315)
Pin
Description
Designation 1000BASE-
T
Designation 100BASE-
TX
Fig. 2: M12 socket,
camera rear view
1
MDX0+
BI_DA+
TX+
2
MDX0-
BI_DA-
TX-
3
MDX1+
BI_DB+
RX+
4
MDX1-
BI_DB-
RX-
5
MDX3+
BI_DD+
-
6
MDX3-
BI_DD-
-
7
MDX2-
BI-DC-
-
8
MDX2+
BI_DC+
-
The M12 connector of the IDS NXT rome complies with the IEC/PAS 61076-2-109 standard.
6.2 Pin assignment I/O connector
12-pin M12 connector (Attend 216A-12MSR)
Pin
Signal
Description
Fig. 3: I/O connector,
camera rear view
1
VBUS
Power supply: 12-24 V DC +20 %
2
VBUS GND
Reference level (ground) for power supply and RS-232
3
Opto IN (0)
Trigger input with optocoupler
4
Opto IN (1)
Input 1 with optocoupler
5
Opto IN (COM)
Reference level for all Opto IN
6
Opto OUT (COM)
Reference level for all Opto OUT
7
Opto OUT (1)
Output 1 with optocoupler
8
Opto OUT (2)
Output 2 with optocoupler
9
RS232 (RxD)
Serial interface
10
RS232 (TxD)
Serial interface
11
Opto IN (2)
Input 2 with optocoupler
12
Opto OUT (0)
Flash output with optocoupler
Shield
Shield
Shield
You can check the color assignment of the cable on the
directly at the specific accessory item.
The maximum length of the I/O cable is 30 m. The cable must be shielded.