HYYP Module 700-684-01B
Power up Procedure
The following is a description of the sequence that the module takes to connect to the
hyyp platform, to help you fault find where the issue is, if the module fails to connect
and communicate with the security company control room or hyyp Home APP on you
cell phone.
1.
Module powers up
a.
LEDS will randomly flash as the system boots up.
2.
Connecting to the Cell network.
a.
The three signal strength LEDs will flash once wait for a second and
flash again and repeat until connected to the network.
3.
Receiving the time
a.
The three signal strength LEDs will flash twice wait for a second and
repeat until the time is received to allow connection to the HYYP
platform.
4.
Connecting to the HYYP Platform
a.
The three signal strength LEDs will flash three times wait for a second
and repeat until connected to the platform.
b.
The server LED will come on indicating that it is connected to the HYYP
platform.
Antenna must be mounted
vertically on the wall.
Note:
Do not put the antenna in the
box.
