IDS 816, Руководство пользователя

Страница: 14 / 28

IDS816 User Manual 700-283-01H Issued January 2009
14
A PANIC ALARM may also be activated using any FIXED PANIC button or a REMOTE PANIC
button (if installed).
If the audible panic option has been selected, the siren will sound. A PANIC ALARM will be
transmitted to the monitoring company.
To silence the siren, enter a valid [USER CODE].
Press the [P] key only in an emergency situation that requires response by emergency personnel.
9.3 9.3 9.3 9.3 Medical Alarms Medical Alarms Medical Alarms Medical Alarms
Hold down the [M] key until the beep
If the [M] key is pressed until the keypad beeps (approximately 1 second) a MEDICAL ALARM
condition will be activated.
The keypad buzzer will beep 5 times.
A medical reporting code will be reported to the monitoring company.
9.4
9.4 9.4
9.4 Duress
Duress Duress
Duress Alarms
Alarms Alarms
Alarms
[#] [DURESS CODE]
This is a special user code that should only be used in the unique situation where an intruder
forces one to disarm the system “under duress”.
When a [DURESS CODE] is entered, the control panel disarms.
A Duress Alarm Code (if programmed) will be reported to the monitoring company, but the siren
will not sound..
It is advisable to choose a Duress code that can be easily remembered by all family (or staff)
members.
10.
10. 10.
10. Alarm Memory
Alarm Memory Alarm Memory
Alarm Memory
Hold down the [0] key until the beep
The Alarm Memory displays any zones that were violated, tampered with, or bypassed during the last
arm cycle. A flashing ARMED indicator notifies the user of an alarm memory condition. To view the alarm
memory, disarm the panel and continue as follows:
1.
Hold down [0] until the keypad buzzer sounds.
2. The READY and POWER indicators will turn off and the keypad buzzer will sound briefly.
3. Zone indicators that are on, show which zones were violated during the last armed period.
4. Press 2 to display zones that were bypassed.
5. Press 3 to display which zones were tampered with.
6. Press 1 to return to violated zones.
7. Note that the alarm memory is erased at the beginning of each arm cycle – so it should always be
checked BEFORE re-arming, if necessary.