IDS GeoRadar IBIS-ArcSAR, Руководство пользователя

Страница: 48 / 78

Confidential Information - Do Not Distribute
Fig. 100 – PSU and GENSET Isolation Points switch turned on
Remind to control the releasing of the emergency stop buttons. If the
emergency stop button is pushed, devices will be electrically isolated.
5.12 Generator First Setup
5.12.1 Oil refill
Before starting this operation, a dry cloth, engine oil and a funnel are
required. Then follow the steps below:

make sure the engine lays on a levelled surface;

stop the generator and isolate it, turning off the GENSET switch on
the PSU front door and the Genset Isolation Point switch;
WARNING
SHOCK HAZARD
MOVING PARTS HAZARD
Any maintenance operation on the generator must be carried out with
the engine off and the system isolated. It is mandatory to turn OFF the
Genset Isolation Point switch before working on the generator.

open the generator rotating panel, unlocking the two metal locks (
Fig.
101
);
Fig. 101 – Opening the Generator internal panel

unscrew the orange cap/dipstick and clean it with a clean cloth (
Fig.
102
);