IDS GeoRadar IBIS-ArcSAR, Руководство пользователя

Страница: 32 / 78

Confidential Information - Do Not Distribute
The installation of the Weather Station, Wi-Fi Link and Generator Solar
Panel (see Paragraph 5.5) has to be done with their cables already
connected (
Fig. 58
). The pole can be rotated to set the best line of sight of
the Wi-Fi;
In order to increase the stability of the pole, the tie-rod metallic wire has to
be hook with the karabiners to the ArcSAR Supply Unit. If the tie-rod
metallic wire is not well drawn, it is necessary to fasten the tie-rod.
Fig. 58 – Pole with installed devices
5.5 IBIS Accessories on Pole
5.5.1 Weather Station
The following sequence of operations should be performed in order to
install the Weather Station. The provided pole can be used as a support.
The Weather Station is placed in the big cardboard shipped box.
Fig. 59 – Installation steps (1/3)
1. take the anemometer arm and wind cups;
2. push the wind cups into the stainless steel shaft of the anemometer
arm;
3. slide the wind cups up the shaft as far as possible;