VAC-2000UHD / 4000UHD User’s Guide
14
6 Precautions before connection
Follow the precautions below before connecting to external devices.
■
Attaching rubber feet
1.
Turn the VAC upside down and place it on a flat place.
2.
Wipe the dirt off joint area.
3.
Peal the release papers from rubber feet and place them on each corner of the VAC.
■
Installation
・
Eliminate static electricity from your body before connecting cables.
・
Do not place another VAC on the VAC.
・
Do not block vent holes. Keep enough space (1.2 in. (30 mm) or more) around the product.
・
Do not install the VAC in a closed space.
If you have to install the product to an EIA rack mount in closed space, add a ventilation to keep the
ambient temperature of 40 degrees C/104 degrees F or less. If inadequately vented, the life of parts
may be shortened and operations may be affected.
■
Cabling
・
Read the manuals of external devices carefully
・
Turn off the transmitter/receiver before connection.
・
Insert the cable into the connector firmly and do not give the connector stress.
・
Secure the HDMI cable using a cable clamp to prevent it from falling out of the device.
Attaching HDMI
cable
Removing HDMI
cable
①
②
③
Remove the clamp
while pressing here.
④
②
④
⑤
①
③
Clicking
[Fig. 6.1] Attaching/Removing cable clamp